voron4
It’s even bigger! It’s CoreXY!
Base stats#
- Make: Voron
- Model: V2.4r2
- Filament diameter: 1.75mm
- X = 300
- Y = 300
- Z = 280 (damn Z rails!)
- Layer heights = 0.05mm-0.35mm (based on 0.4mm nozzle)
- Hotend max: 300C
- Bed temp max: 120C
- Max travel speed: 450mm/s (planned, might be higher)
- Motherboard: BTT Octopus V1.1
- Flavor: Klipper
- Kit: LDO V2
Hardware options chosen#
- Hotend: Dragon ST
- Direct drive: yes
- Filament runout sensor: yes
- Bed mesh leveling: yes
- Hardened Steel Nozzle: no (0.4mm)
- Bondtech CHT 0.4mm nozzle
- at this point there are no plans for hardened nozzle
- Flexible build plate: yes
Kinematics are mesmerizing#
What is CoreXY? All3DP has a decent article on it.
Types of FDM printers can be confusing and this article helps fill in some knowledge gaps.
So pretty, watch some vids:
- Voron Trident venom testing speed 10k accelleration, 600mm/s print speed
- Voron Trident first bed tramming 3-point bed tramming magic
Note: The Prusa XL is also on preorder if only cause Prusa is pretty kick ass