voron1
It’s bigger than a V0.1! It’s CoreXY!
Base stats#
- Make: Voron
- Model: Trident
- Filament diameter: 1.75mm
- X = 300
- Y = 300
- Z = 250
- Layer heights = 0.05mm-0.35mm (based on 0.4mm nozzle)
- Hotend max: 300C
- Bed temp max: 110C
- Max travel speed: 450mm/s
- Motherboard: BTT Octopus V1.1
- Flavor: Klipper
- Kit: Formbot3D Trident
Hardware options chosen#
- Hotend: Dragon ST
- Direct drive: yes
- Filament runout sensor: yes
- Bed mesh leveling: yes
- Hardened Steel Nozzle: no (0.4mm)
- currently using Bondtech CHT 0.4mm nozzle
- upgrading to Nozzle X or ObXidian once initial tuning is complete if using abrasives
- Flexible build plate: yes
Kinematics are mesmerizing#
What is CoreXY? All3DP has a decent article on it.
Types of FDM printers can be confusing and this article helps fill in some knowledge gaps.
So pretty, watch some vids:
- Voron Trident venom testing speed 10k accelleration, 600mm/s print speed
- Voron Trident first bed tramming 3-point bed tramming magic
Note: The Prusa XL is also on preorder if only cause Prusa is pretty kick ass